EmbDev.net

Forum: FPGA, VHDL & Verilog AMBA architecture


Author: Sai Kapp (Company: whizchip) (sai685)
Posted on:

Rate this post
0 useful
not useful
Can any one send me qlues codes regarding
1. Write a task to perform write operation which includes four states 
such as NON_SEQ,SEQ,IDLE,BUSY. in which NON_SEQ state means it is 
indicating start of a transfer, and BUSY means not ready to transfer, 
SEQ means a continuos transferring
2 . In the same way read task

Author: Sai Kapp (Company: whizchip) (sai685)
Posted on:

Rate this post
0 useful
not useful
it is incremental burst
and the transfer size is 4bytes

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.