EmbDev.net

Forum: Analog Circuits charge pump circuit for IGBT high side


Author: sriniketh (Guest)
Posted on:
Attached files:

Rate this post
0 useful
not useful
I wanted to make a IGBT high side circuit, with the help of reference 
diagram , i have made a LT spice schematic with charge pump design with 
out any gate drivers. The simulation worked fine and as i needed.

But will the circuit will work without gate drivers ?

kindly guide me through this .

regards

sriniketh

Author: Sriniketh Ravindran (sriniketh)
Posted on:
Attached files:

Rate this post
0 useful
not useful
I wanted to make a IGBT high side circuit, with the help of reference
diagram , i have made a LT spice schematic with charge pump design with
out any gate drivers. The simulation worked fine and as i needed.

But will the circuit will work without gate drivers ?

kindly guide me through this .

regards

sriniketh

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.