Forum: FPGA, VHDL & Verilog Using EPCS64 Device with DE0 nano Board

Author: jeorges FrenchRivera (Company: xlue) (khal1985)
Posted on:

Rate this post
0 useful
not useful

I would like to use EPCS64 Device to store FPGA images and NIOS II 
software. For that purpose, in Qsys I add Altera Serial Flash 
My design complies with no problem and the image of the FPGA 
configuration is done with success using the programmer tool of Quartus.

Then i used eclipse to develop my software part, But when i use the 
Flash Programmer to create an image of  NIOS II .elf file and then load 
it in the EPCS64, i get error that says that CIF flash is not fond.

I don't know if i used the correct Flash controller.

Could anyone help me about this issue?


Best regards


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.