Forum: µC & Digital Electronics Project with PSoC 5 CP

Author: Max Otto (maxotto1)
Posted on:

Rate this post
0 useful
not useful
Hi all,
I'm doing my new project in PSoC 5LP controller. I need your advice for 
this. The input should be an analog signal (by 0,1V..bis..4V). 
Generating the output of PWM signals. 1 shows the front PWM signals and 
the second shows reverse PWM signals. Full project should run with 
controlled interruption

Please recommend me to create my task.
Thanks in advance.



Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.