Forum: Test FPGA and test equipement

Author: issam sassi (Company: uqtr) (isamel85)
Posted on:

Rate this post
0 useful
not useful
In fact, I'm working on a project which aims to implement a 
reconfigurable Zigbee tranceiver on XUPV5-LX110T Evaluation platform 
which integrates a Virtex 5 FPGA. I am currently in the phase of real 
First, I want to send my data from a PC to FPGA and receive it (to treat 
my signals on Matlab). Is this possible or not? If yes, Is there a 
solution for it using a medium of communication (e.g. serial link)
Second, is there a measuring equipment and testing (e.g. Agilent or 
National Instruments using PXI) which supports the Zigbee wireless 
protocol or otherwise IEEE 802.15.4 standard (i.e. RF Vector Signal 
Generator and Vector Signal Analyzer) of the analog front-end either in 
transmission or reception?
And thanks a lot in advance for everyone.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.