EmbDev.net

Forum: FPGA, VHDL & Verilog servo controller


Author: vhdl newbie (Company: none) (pranoy)
Posted on:

Rate this post
0 useful
not useful
hi guys,
         i am new to FPGA. Can u guys help me with programing an FPGA to 
be a servo controller for controlling its position, velocity, and 
acceleration.

Author: Lothar Miller (lkmiller) (Moderator)
Posted on:

Rate this post
0 useful
not useful
What kind of "servo" do you mean?
What's the interface to it?
What is the target platform?
What level of knowledge do you have?
Which HDL do you want to use?

Author: Norbert (Guest)
Posted on:

Rate this post
0 useful
not useful
If you intend to use standard RC servos with PPM control, this might be 
what you're looking for.

http://www.alse-fr.com/archive/RCservo.pdf

Otherwise it would be useful if you could give us some additional 
information. About the desired language (VHDL, Verilog) i.ex. etc.

Kind regards,

Norbert

Author: vhdl newbie (Company: none) (pranoy)
Posted on:

Rate this post
0 useful
not useful
thnx

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.