Forum: PCB Design & Technology EAGLE - forward backward annotations disabled; move command in board disabled

Author: Ralf S. (android)
Posted on:

Rate this post
0 useful
not useful
If you are confused because in schematics the forward/backward 
annotations are suddenly disabled and in the board the move-command is 
also disabled you should check the grid-settings in the board.

Sometimes they are set to 0.

In my case this happened when opening several files and not closing BOTH 
.sch and .brd together.


Author: Kevin K. (Guest)
Posted on:

Rate this post
0 useful
not useful
Hi, which Version of Eagle do you use? I tried to force this bug with 
V6.2 and could not achieve this.
But if it occurs somewhen, it's good to know how to fix it, so thank you 
for telling us.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.