Forum: FPGA, VHDL & Verilog Telephone interfacing to FPGA

Author: anil maddu (Company: cognition tech labs) (madduanil)
Posted on:

Rate this post
0 useful
not useful

I need to connect one telephone at the input of first FPGA and connect 
another telephone at the output of 2nd FPGA. The FPGA's will perform the 
process of speech encryption and decryption. Both these input and output 
FPGA's can communicate with each other in wireless or wired mode. Help 
me in proceeding towards this project.

How can i interface my lined telephone with an FPGA ?

Thanks in advance for your valuable time.


Author: Deka (Guest)
Posted on:

Rate this post
0 useful
not useful
Not too bad job. Well you'll need some kind of analogue input circuit 
bringing the voltage from the phone-line down to a usable range (e.g. 
0-5V DC). Further more get some Audio ADC and Audio DAC and you'll be 


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.