EmbDev.net

Forum: FPGA, VHDL & Verilog open source GHDL (VHDL) tool development


Author: Raghavendra B. (raghavendra_b98)
Posted on:

Rate this post
0 useful
not useful
Hi.
I'm working on GHDL tool developmnet,done these steps for solving bugs 
in tool
rpm -i ghdl-0.29-2.143svn.4.fc16.src.rpm
rpmbuild -ba ~/rpmbuild/SPECS/ghdl.spec
up to here working fine,after words i strucked please guide me next 
steps.

Author: Duke Scarring (Guest)
Posted on:

Rate this post
0 useful
not useful
> up to here working fine,after words i strucked
What is your error message?

Duke

Author: Raghavendra B. (raghavendra_b98)
Posted on:

Rate this post
0 useful
not useful
Thanks for your intrest. try to confgiure ./configure scripts gave 
message

checking whether to enable maintainer-specific portions of Makefiles... 
no

but it creates an makefile config.status: creating Makefile
make gave an below error

make[3]: *** [cc1-dummy] Error 1
make[2]: *** [all-stage1-gcc] Error 2
make[1]: *** [stage1-bubble] Error 2

Author: dose (Guest)
Posted on:

Rate this post
0 useful
not useful
can you also post a little before. The last command print out an error.
Now we can guess what command goes wrong an print this error.

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.