Forum: µC & Digital Electronics RFM12 module self test

Author: Martyn JUDD (martynj)
Posted on:

Rate this post
0 useful
not useful
Hi, after following some of the threads on the RFM12 transceiver module 
here and in the companion mikrocontroller.net, I wonder if it is 
possible to put the module in RF loopback.  Meaning to enable the 
transmitter and receiver at the same time to see the output bit stream 
return as input.  The objective is to create a simple go/nogo test of 
basic functionality without needing another operating unit.


Author: Sauger (Guest)
Posted on:
Attached files:

Rate this post
0 useful
not useful
There is no self-test


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.