Forum: µC & Digital Electronics DRV8833 as BLDC motor driver

Author: Jeremy Royston (jerryr)
Posted on:

Rate this post
0 useful
not useful
Has anyone used a pair of these ICs (datasheet 
http://www.ti.com/lit/gpn/drv8833). It has the advantage that the motor 
voltage can be between 2.7 and about 11V, the input logic levels are 0 
and 2V
Best wishes, Jerry


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.