EmbDev.net

Forum: µC & Digital Electronics General Questions


Author: Tushar K. (tushar_k)
Posted on:

Rate this post
0 useful
not useful
Hi,

I am learning few linux system level conepts and working on some 
hardware related things.I want to understand

How GPIO Muxing works?

What is pad configuration?

What is "bank" and its base for any pin?


How GPIO and PAD conf is related?

thanks,

Tushar

[Mod: Topic edited, Thread moved]

: Moved by Moderator
Author: Juergen G. (jup)
Posted on:

Rate this post
0 useful
not useful
Hard to say, you should give us more specific information.

>How GPIO Muxing works?
>What is pad configuration?
>What is "bank" and its base for any pin?
>How GPIO and PAD conf is related?

Especially to what are that questions related.

Linux?

Hardware?
what hardware?

Author: Registereqw (Guest)
Posted on:

Rate this post
0 useful
not useful
>How GPIO Muxing works?
>What is pad configuration?
>What is "bank" and its base for any pin?
>How GPIO and PAD conf is related?

Have a look into your controller datasheet.

E.g. the RM0008 Reference manual explains such things for
the STM32.

HTH,

Registereqw

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.