Forum: µC & Digital Electronics Connection Solid State Relais

Author: Sheik (Guest)
Posted on:
Attached files:

Rate this post
0 useful
not useful
Is sharp connection using only pin 6 and 8 correct?
I miss the connection of Zero Crossing pin 5
Connect pin 5 to pin 6?

Data Sheet from

Author: na sowas (Guest)
Posted on:

Rate this post
0 useful
not useful
This connection in the datasheet is correct.

At least this circuit is told to work properly:
Beitrag "Re: elektr. Rolladenschalter"


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.