EmbDev.net

Forum: FPGA, VHDL & Verilog Need help using Actel iGLOO Nano on Altium


Author: Shi Quan Arthur Yeo (ayeosq)
Posted on:

Rate this post
0 useful
not useful
Well, Altium claim that they support iGLOO Nano.
Set up the LCP and power up, added new project to Altium.
Checked device connectivity, no device detected.
Weird, driver were installed, but device doesn't show connected on 
altium.
What do you guys suggest?

Author: Duke Scarring (Guest)
Posted on:

Rate this post
0 useful
not useful
> What do you guys suggest?
Maybe you need an actual version of Altum Designer?
Or you can ask the Altium Forum: http://forums.altium.com

Duke

Author: Shi Quan Arthur Yeo (ayeosq)
Posted on:

Rate this post
0 useful
not useful
Well, I have a licensed AD10.
But the kit just can't be recognized by AD10.

Arthur

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [vhdl]VHDL code[/vhdl]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.