EmbDev.net

Forum: Analog Circuits changing -1 to 1 voltage to 0 to 2


Author: bgn (Guest)
Posted on:

Rate this post
0 useful
not useful
how would I go about doing that? I have a stereo signal which I want to 
shift to positive voltages only so that I can feed another chip with the 
signal.

Author: Na sowas (Guest)
Posted on:

Rate this post
0 useful
not useful
Try this:
             1V 
              |
              R
              |
+-1V  ---||---o----->  0..2V

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.