EmbDev.net

Forum: ARM programming with GCC/GNU tools usbprog as OpenOCD-adapter

usbprog as OpenOCD-adapter
Author: Lasse S. (Company: Projekt: www.punctr.com) (cowz)
Posted on: 
Hi,

I'm going to buy a STM32-Devboard. But I'm still looking out for an
JTAG-Adapter, something cheap that'll work with OpenOCD / GDB.

I've got an usbprog already (used for AVR-programming). Can I use that
with the firmware available? With the AVR it was not really fun with
many errors and no support. Is the OpenOCD firmware usable, or is it
worth it to buy a ARM-JTAG-Tiny from Olimex?

I don't want to buy the devboard and then realise that the usbprog is
not really useable and then reorder (and pay shipping again).

greets,
Lasse
Report post | Edit | Move | Thread sperren | Delete topic | Reply | Reply with quote
Enable email notification | Enable multi-page view

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]



Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.
webmaster@embdev.net – Contact – Advertising on EmbDev.net