Forum: ARM programming with GCC/GNU tools help needed for make and linker script file

Author: Ahmed Sheikh (ahmedshakeel)
Posted on:

Rate this post
0 useful
not useful
i m new to linux and i have installed fedora 8.i installed arm gcc tool
and ran example with no error.


It as configured for 2378 as i found in make file,also i found there was
a linker script in the folder.i tried to change the 2378 to 2368 and
startup.s to lpc2300s but it does not work.please  help me  to compile a
project for the controller i want ,i dont know how to write a make file
or a linker script.i need make a project for 2368.


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.