EmbDev.net

Forum: ARM programming with GCC/GNU tools HP iPAQ h5450 jTAG with openOCD


Author: Udo kuhn Edaconsult (edaconsult)
Posted on:

Rate this post
0 useful
not useful
Manual for HP iPAQ h5450 jTAG with openOCD

Contents
1 Hardware
1.1 HP iPAQ h5450 jTAG points ......................... 3
1.2 Wigller jTAG Schematic ............................ 4
2 Software
2.1 xscale_pxa250_pp.cfg .............................. 5
2.2 openOCD Startup ................................... 6
2.3 Connecting to GDB ................................. 7
2.4 Connecting to Telnet .............................. 8


http://home.arcor.de/EDAconsult/Page3/index.html?c~6.2

Author: Udo kuhn Edaconsult (edaconsult)
Posted on:

Rate this post
0 useful
not useful
Udo kuhn Edaconsult wrote:
> Manual for HP iPAQ h5450 jTAG with openOCD
>
> Contents
> 1 Hardware
> 1.1 HP iPAQ h5450 jTAG points ......................... 3
> 1.2 Wigller jTAG Schematic ............................ 4
> 2 Software
> 2.1 xscale_pxa250_pp.cfg .............................. 5
> 2.2 openOCD Startup ................................... 6
> 2.3 Connecting to GDB ................................. 7
> 2.4 Connecting to Telnet .............................. 8
>
>
> http://home.arcor.de/EDAconsult/Page3/index.html?c~6.2

A mistake in Docu HP iPAQ h5450 jTAG V1.0
pleace connect nSRST to nTRST pin 3 Wiggler Interface

modification follow in Docu V1.1

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.