EmbDev.net

Forum: ARM programming with GCC/GNU tools USBdriver for AT91SAM7S256-clone?


Author: Nils Soderman (nilswed)
Posted on:

Rate this post
0 useful
not useful
Hello out there,
I am trying to load my AT91SAM7S256-clone-board with SAMBA via USB. It
is not working as the driver seems to be nonexistent... My Win2000 tells
me no driver is installed, been trying to instal a driver but Win2000 do
not accept my suggestions! So where can I get a .inf and .sys file for
the board? Must I buy a original board and use the DVD delivered with
it?
Hope someone has a suggestion for solving this...
Best regards
Nils

Author: Martin Thomas (mthomas) (Moderator)
Posted on:

Rate this post
0 useful
not useful
Nils Soderman wrote:
> Hello out there,
> I am trying to load my AT91SAM7S256-clone-board with SAMBA via USB. It
> is not working as the driver seems to be nonexistent... My Win2000 tells
> me no driver is installed, been trying to instal a driver but Win2000 do
> not accept my suggestions! So where can I get a .inf and .sys file for
> the board? Must I buy a original board and use the DVD delivered with
> it?

Try to reinstall the AT91-ISP package (avail. from atmel.com). IRC the
needed files are included.

Author: Nils Soderman (nilswed)
Posted on:

Rate this post
0 useful
not useful
Martin Thomas wrote:
> Nils Soderman wrote:
>> Hello out there,
>> I am trying to load my AT91SAM7S256-clone-board with SAMBA via USB. It
>> is not working as the driver seems to be nonexistent... My Win2000 tells
>> me no driver is installed, been trying to instal a driver but Win2000 do
>> not accept my suggestions! So where can I get a .inf and .sys file for
>> the board? Must I buy a original board and use the DVD delivered with
>> it?
>
> Try to reinstall the AT91-ISP package (avail. from atmel.com). IRC the
> needed files are included.

Thanks Martin!
I tried that before posting first message, to be sure I tried again
after your post!
No luck!
Is the problem Win2000 with USB perhaps???
Best regards
Nils

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.