Forum: ARM programming with GCC/GNU tools InSight IDE Shows 0 Only

Author: Warren Wang (wmw)
Posted on:

Rate this post
0 useful
not useful
I loaded a copy of Nut/OS v. 4.4.2 into an Atmel AI91SAM7x256 demo
board. The tools used in this excercise are the InSight IDE, the GDB
server and a JTAG debugger. ARM-GCC is used for the build. The only
application is the tcps module. Everything appears O.K. except that the
Insight debugger shows every variable nothing but a 0. Can you help?


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.