EmbDev.net

Forum: ARM programming with GCC/GNU tools jtag cable for mac osx ?


Author: Bert Schiettecatte (bschiett)
Posted on:

Rate this post
0 useful
not useful
hi all,


i was wondering if there are any good JTAG cables for max osx? I have a
board here with at AT91SAM7S series part on it.

thanks,
Bert

Author: Martin Thomas (mthomas) (Moderator)
Posted on:

Rate this post
0 useful
not useful
Bert Schiettecatte wrote:
> i was wondering if there are any good JTAG cables for max osx? I have a
> board here with at AT91SAM7S series part on it.

I'm not using OS X so the following are just some remarks:

IRC using OpenOCD with an FTDI FT2232-based JTAG-interface (Amontec
jtagkey, Olimex USB ARM JTAG, Signalizer etc.) on MacOS X has been
discussed either in the OpenOCD forum at sparkfun or the OpenOCD
developer mailing list at berlios. If not the forum/list might be a
better place to ask. Since FTDI provides drivers for OS X and it should
be possible to compile OpenOCD for this System.

If you have some funds you may go with a "Ethernet to JTAG" Interface
(which is much more than a "cable") that provides a gdb-server "over
TCP/IP" (Peedi, BDI2000).


Martin Thomas

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.