Forum: ARM programming with GCC/GNU tools ISP schematic and tool for lpc2138 or lpc2134

Author: Wagner Silva (wgr7)
Posted on:

Rate this post
0 useful
not useful
Sorry my english is bad.

Well,I'm a newbie in LPC MCUs.I'm only programed for 8051 family
processors(AT89S52).This time I've been interested on programming 32bits
MCUs.I like a schematic e tool for programing LPC2138 in ISP mode.If
someone can help me I've gratefull.


Author: Stefan (Guest)
Posted on:

Rate this post
0 useful
not useful
As far as i understand from http://www.nxp.com/pip/LPC2132FBD64.html you
have an on-chip bootloader inside the LPC2138 and this bootloader does
the actual ISP procedure with data coming from e.g. UART and when P0.14
is low (see AN 10302 from NXP).



Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.