EmbDev.net

Forum: ARM programming with GCC/GNU tools AT91SAM7 flash programming on OS X


Author: John Berry (twelvetones)
Posted on:

Rate this post
0 useful
not useful
Andreas tells me that lpc21isp doesn't work for the AT91SAM7 chip.

Is anyone aware of software (preferably free :) that can be used to
program this chip on OS X?

Thanks!
John

> Hi,
>
> lpc21isp doesn't work for AT91SAM7. I don't have any experience with
> this controller family, and I don't know any tool for AT91SAM7
> programming on OS X. You might want to start a new topic with this
> question.

> Andreas

Author: Martin Thomas (Guest)
Posted on:

Rate this post
0 useful
not useful
john berry wrote:
> Andreas tells me that lpc21isp doesn't work for the AT91SAM7 chip.

Yes, so far lpc21isp can only be used with the preinstalled bootloaders
from LPC2000 and ADuC7000 ARM7 controllers.

> Is anyone aware of software (preferably free :) that can be used to
> program this chip on OS X?

Maybe this is useful (from the at91.com-Forum):
http://www.pjrc.com/arm/sam7_pgm/
Seems to be made for Linux/Unix but may be compiled for a BSD-based
system like OS X too.

Martin Thomas

Reply

Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]




Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.