Forum: ARM programming with GCC/GNU tools precompiled openocd SVN-version 55 available for tests

Author: Martin Thomas (Guest)
Posted on:

Rate this post
0 useful
not useful
The new WinARM with gcc 4.1.0 is still "on delay" since I do not have
the time to do at least a little testing with the hardware. But a
precompiled version of Dominic Rath's openocd together with the needed
cygwin and FTDI DLLs is already available on the WinARM-page (link in
small font-size). I have not tested it but hope it will be useful. Make
sure ioperm.sys is installed for "Wigglers" (included) and ftd2xx.sys is
installed for FTDI-based devices (Installer available from

Martin Thomas


Entering an e-mail address is optional. If you want to receive reply notifications by e-mail, please log in.

Rules — please read before posting

  • Post long source code as attachment, not in the text
  • Posting advertisements is forbidden.

Formatting options

  • [c]C code[/c]
  • [avrasm]AVR assembler code[/avrasm]
  • [code]code in other languages, ASCII drawings[/code]
  • [math]formula (LaTeX syntax)[/math]

Bild automatisch verkleinern, falls nötig
Note: the original post is older than 6 months. Please don't ask any new questions in this thread, but start a new one.