*** making backup...
*** backing up fuses...

avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9405
avrdude: reading lfuse memory:

Reading | ################################################## | 100% 0.00s

avrdude: writing output file "2013-03-30_21:11:19/lfuse.hex"
avrdude: reading hfuse memory:

Reading | ################################################## | 100% 0.01s

avrdude: writing output file "2013-03-30_21:11:19/hfuse.hex"
avrdude: reading efuse memory:

Reading | ################################################## | 100% 0.01s

avrdude: writing output file "2013-03-30_21:11:19/efuse.hex"

avrdude: safemode: Fuses OK

avrdude done.  Thank you.

*** backing up flash and eeprom...

avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9405
avrdude: reading flash memory:

Reading | ################################################## | 100% 3.19s

avrdude: writing output file "2013-03-30_21:11:19/hr20.hex"
avrdude: reading eeprom memory:

Reading | ################################################## | 100% 0.60s

avrdude: writing output file "2013-03-30_21:11:19/hr20.eep"

avrdude: safemode: Fuses OK

avrdude done.  Thank you.

*** setting fuses...

avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.02s

avrdude: Device signature = 0x1e9405
avrdude: reading input file "0x9B"
avrdude: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude: 1 bytes of hfuse written
avrdude: verifying hfuse memory against 0x9B:
avrdude: load data hfuse data from input file 0x9B:
avrdude: input file 0x9B contains 1 bytes
avrdude: reading on-chip hfuse data:

Reading |                                                    | 0% 0.00savrdude: jtagmkI_read_byte(): timeout/error communicating with programmer (resp )
*** writing openhr20 flash and eeprom...

avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude: Device signature = 0x1e9405
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: jtagmkI_initialize(): warning: OCDEN fuse not programmed, single-byte EEPROM updates not possible
avrdude: reading input file "hr20.hex"
avrdude: input file hr20.hex auto detected as Intel Hex
avrdude: writing flash (15854 bytes):

Writing | ################################################## | 100% 4.16s

avrdude: 15854 bytes of flash written
avrdude: verifying flash memory against hr20.hex:
avrdude: load data flash data from input file hr20.hex:
avrdude: input file hr20.hex auto detected as Intel Hex
avrdude: input file hr20.hex contains 15854 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 3.09s

avrdude: verifying ...
avrdude: 15854 bytes of flash verified
avrdude: reading input file "hr20.eep"
avrdude: input file hr20.eep auto detected as Intel Hex
avrdude: writing eeprom (408 bytes):

Writing | ################################################## | 100% 1.11s

avrdude: 408 bytes of eeprom written
avrdude: verifying eeprom memory against hr20.eep:
avrdude: load data eeprom data from input file hr20.eep:
avrdude: input file hr20.eep auto detected as Intel Hex
avrdude: input file hr20.eep contains 408 bytes
avrdude: reading on-chip eeprom data:

Reading | ################################################## | 100% 0.60s

avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
         0x0e != 0x04
avrdude: verification error; content mismatch

avrdude: safemode: Fuses OK

avrdude done.  Thank you.

*** done!